Do You Have a Slab Leak? Pueblo Slab Leak Risk Checker
A slab leak is a failure in a supply line running under your home's concrete foundation. Because the pipe is buried, the leak shows only through secondary signs: a higher water bill, sounds of running water with all fixtures off, or warm spots on the floor above a hot-water line break. None of these signs are certain proof on their own, but together they indicate how likely an active slab leak is.
This checker scores the signs you are experiencing to give a risk level. It is a guide to help you decide whether to call for professional detection, not a diagnosis. Professional slab leak detection uses acoustic and thermal equipment that locates the pipe break precisely before any concrete is opened. If you want to first confirm water is moving through your meter with all fixtures off, use the Hidden Water Leak Detector tool.
Answer Each Question
-
Unexplained spike in your water bill with no change in water use
-
Sound of running water when every faucet and appliance is off
-
Warm or hot spots on the floor with no radiant heating system
-
Your water meter keeps moving with all water fixtures shut off
-
Damp, warped, or buckling flooring, or a musty smell with no visible source
-
Low water pressure throughout the whole home
-
New cracks in walls or floors, or doors that suddenly stick
-
Unusually wet or extra-green patch of yard near the foundation
-
Home is over 20 years old with original copper or galvanized pipes
Frequently Asked Questions
The most reliable indicators are a water bill spike with no usage change, the sound of running water when all fixtures are off, a water meter that moves with all valves closed, and warm spots on the floor above a hot-water line. Secondary signs include low pressure throughout the home, new wall or floor cracks, damp flooring, and musty odors. Multiple signs together raise the probability significantly. Learn more about slab leak detection in Pueblo.
Yes. A slab leak is a supply-line failure, and supply water passes through the Pueblo Board of Water Works street meter regardless of where it goes. An active slab leak can waste 1,400 to 4,300 or more gallons per day, adding $50 to $150 or more per month to a Pueblo Water bill at 2026 rates. If an indoor slab leak runs during the Dec through Feb wastewater base period, it also raises the sewer portion of the bill. Use the Hidden Water Leak Detector to confirm the meter is moving before calling.
Professional detection uses acoustic listening probes placed on the floor surface or pipe access points. The probes detect the sound of water escaping under pressure, and the signal peaks at the failure point. Thermal imaging cross-checks the location by identifying temperature differences on the floor above a hot-water line break. Two confirmed methods mean one access cut at the right location, not exploratory demolition. See how we approach acoustic leak detection and thermal imaging leak detection.